2.11. A motor that runs in after repair

The repaired motor is subjected to tests of bank (running in) without overdoing the next cycle.
                            Rotation frequency,
                             I draft 1 Time, draft.                                  
750-800......................................... 2 
1000.............................................. 3
1500.............................................. 4
2000.............................................. 5

Having installed the motor in the bookcase, leave it and check:
— the lack of a hole of cooling the liquid or the fuel between the inter-connected details and in oil pipelines connections;
— pressure of oil and lack of drop of oil through placing;
— installation of the moment of ignition;
— rotation frequency to waste time;
— the tension of connections of a power supplies to the system in a driving compartment.
If the foreign blows or the bad functioning are, give birth to the motor, remove them, and soon continue tests.
On the oil drop through the placing between the trundle bed of a case and the cylinder block fixation pins insist the recommended moment. If it does not stop the hole, check the placing and if necessary it substitutes it.
In oil drop through placing between a covering of a head of the cylinder block and a head of the placing of block of control and hats of rubber in surfaces of face of a head of the cylinder block. If necessary it substitutes placing and hats, noticing that the recommendations affirmed in the subsection "The meeting of the Motor".
After the repair of the motor there is necessary there observes certain way of Repair during the period the extra profit of surfaces of work of new details. Specially it belongs to those motors in which pistons, the insertions of the conrod and radical loads, pereshlifovana of a neck of an end of inclination, a few cylinders otkhoningovana were substituted.
Therefore, during a management in of the motor repaired the car they do not subject it to the very loads. The management in of the motor has to be executed with the observance of those speeds of the movement and loadings what are recommended for the car that runs in the period.