Hyundai:: Getz:: general sequence of desmontagem of the motor

2.10. General sequence of desmontagem of the motor

1. The easiest thing to take to pieces the motor and to execute all the types of works in the figurative bookcase. Before the removal of the motor in the bookcase it is necessary to withdraw a pendulum and a covering of the union with the driven disc.

2. If there is no bookcase, it is possible to take to pieces the motor, having strengthened it in a solid bank or a floor. Demolishing the motor without bookcase it is necessary to watch the taken care extra.

3. If it is supposed that the motor is taken to re-catch, then in the beginning it is necessary to withdraw all the unities with hinges and the equipment to establish them subsequently only in the same order, as well as in the moment of independent repairs of capital.

The next appurtenance to such unities:

— creator and arms of his fixation;

— elements of system of reduction in toxicity of the carried out gases;

— distributor of ignition, candle and wires of high voltage of system of ignition;

— the thermostat with the case;

— bomb of cooling the liquid;

— elements of system of provision of power;

— entry and final collectors;

— oil filter;

— fuel bomb;

— elements of a support of the triangular form of interruption (support) of the motor;

— a pendulum with a covering of union and the driven disc.

TO OBSERVE

In the moment of the removal of the motor of unities with hinges specially they show the consideration of those details that can be necessary in the moment of the removal of the motor or for the auxiliary installation. Apply etiquettes in placing, epiploons, sharing, end, lavadores, nuts and other details to establish them in the ancient situation.

4. If the cylinder block of an incomplete complete set, which is the cylinder block with the installed for the mechanism krivoshipno-conrod and group of piston to settle down, then also is necessary to withdraw a head of the cylinder block, the trundle bed of oil and the bomb of oil. The list of the details that are subject to the removal is defined by the accepted repair option.

5. If it is planned to do complete repairs of capital, the motor is necessary for the type and withdraw completely his details in the next order:

— coverings of a belt of gear of the axle;

— gear belt;

— covering of a head of the cylinder block;

— ahead and rear capes of the motor;

— head of the cylinder block and axle;

— oil trundle bed;

— oil bomb;

— conrod and group of piston;

— inclination end.

6. Before being demolished and executing the proceedings of the capital it repairs the next instruments and the equipment will be necessary:

— joint standard of the instrument;

— the small plastic writing desks of box or the plastic loot for the details storage;

— the trundle bed or a shaber of removal of remaining of placing;

— development to prosecute of openings;

— artist of streaptise of shock;

— micrometer;

— indicative of arrow with meeting elements;

— spring compression device;

— device of a honingovaniye of cylinders;

— the instrument to clean of rings flutes in pistons;

— furadeira electric;

— the faucets play and it dies;

— connect brushes (rigid and gentle);

— solvent.