7.9. Cleaners and lavadores of metal adornments

Detergent and lavador of a windshield

  Fig. 7.57. Elements of screenwash: 1 – switch of a cleaner and lavador;
        2 - lever and brush from a cloth to rub of fabric; 3 – reservoir of lavador; 4 – electric motor of lavador; 5 – hoses of lavador; 6 – electric motor and mechanism from a cloth to rub of fabric

The elements of screenwash are shown in the fig. 7.57.

 Electric motor of screenwash
Removal

 Fig. 7.58. A nut of fixation from a cloth to rub of fabric with a brush

Withdraw more clean levers with brushes, having put nuts out of fixing (fig. 7.58).
Moment of an inhalation of a nut of fixation from a cloth to rub of fabric of 18-23 N · m.
Fig. 7.59. Removal of the superior covering of a niche of the air entry

Withdraw a selante and the superior covering of a niche of the air entry (one composes on two parts), when unscrewed four screws of fixing (fig. 7.59).
 Fig. 7.60. Removal of the electric motor and mechanism of screenwash

Withdraw the electric motor and the mechanism of screenwash, having put four pins out of fixing (fig. 7.60).
Moment of an inhalation of pins of fixation of the electric motor and mechanism of screenwash of 7-11 N · m.
The installation is executed as it must be, the return to the removal.

  Check of commutation of speeds of rotation of the electric motor from a cloth to rub of fabric
Separate the capture of contact of the electric motor of a cleaner.
      Fig. 7.61. Contacts of the capture of the electric motor of the mechanism of screenwash: 1 – small speed; 2 – high speed; – I "weigh" 3; 4 – "+" (in the included ignition); 5 – reverse eletromagnético; 6 – is not in use

One to positive capture of the battery recarregável to the contact of "1" capture of the electric motor and the negative capture of the battery to contact "3" captures of the electric motor (fig. 7.61).
One secures that the electric motor works in the small speed.
One to positive capture of the battery recarregável to contact "2" captures of the electric motor and the negative capture of the battery to contact "3" captures of the electric motor.
One secures that the electric motor works in the great speed.
Check of automatic extinguishment
Light the electric motor in a small speed.
Fig. 7.62. The connections scheme marking the way of automatic commutation

Having desconectado contact of "1" capture (fig. 7.62), put the electric motor out in any situation, except the provision of a reverse eletromagnético.
Join between them contacts "1" and "5" captures (to see the fig. 7.62).
Annex the positive capture ("+") of the battery recarregável to contact "4" captures of the electric motor and the negative capture of the battery ("-") to contact "3" captures of the electric motor (to see the fig. 7.62).
One secures that the electric motor for in the provision of a reverse eletromagnético.
Installation
   Fig. 7.63. The sizes of installation of levers and brushes from clothes to rub of fabric: And =40-50 mm; In =40-50 mm

Install levers and brushes of a cleaner, noticing that the sizes specified the fig. 7.63.
 Fig. 7.64. Installation of jets of a lavador of a windshield in points of sprinkling of the washable liquid

Establish jets of lavador of glass for the specified fig of 7,64 sizes.

 Electric motor of lavador of windshield
Removal and installation
Desconecte a wire of "one less" the conclusion ("-") of the battery recarregável.
Desconecte a hose of a lavador of a tank and separate the capture of electric motor.
Fig. 7.65. Pins of fixation of a reservoir of lavador of a windshield

Withdraw a reservoir of lavador, having put two pins out of fixing (fig. 7.65).
The installation is executed as it must be, the return to the removal.
 Check of technical condition
Without withdrawing the electric motor of a reservoir of lavador, fill a tank of the water.
  Fig. 7.66. Contacts of the capture of the electric motor of a lavador of a windshield: 1 – lavador of windshield ("+"); – I "weigh" 2; 3 – lavador of rear glass ("+")

Annex "more" ("+") and "less" ("-") the conclusions of the battery recarregável respectively to captures of the conclusions 1 and 2 of the electric motor (fig. 7.66) and be convinced that the electric motor works and that the water is sprinkled by jets of lavador.
One convinces of the normal Repair of the electric motor.

Detergent and lavador of rear glass

        Fig. 7.67. Elements of a cleaner from rear glass: 1 – hat and capture; 2, 4 – nuts; 3 – revetment; 5 – lever and brush from a cloth to rub of fabric; 6 – fixing pin; 7 – electric motor of mechanism more clean from glass; 8 – fixing pin

The elements of a cleaner from rear glass are shown in the fig. 7.67.

 Electric motor of a cleaner from rear glass
Removal and installation

Fig. 7.68. Removal of a few articles of tapestry of a door of a few back (elements of fixation of a few articles of tapestry of a door of a few back)

Unscrew four screws and desconecte two bearers of a few articles of tapestry of a door of a few back (fig. 7.68).
Withdraw the most clean lever, having put a nut of fixation out.
Moment of an inhalation of a nut of fixation of the lever of a cleaner of 10-13 N · m.
Withdraw the revetment of an axle of the lever of a cleaner and put out a nut of six sides of the fixation.

       TO OBSERVE
During the installation of a hat and the capture of an arrow they have of going to them.

Moment of an inhalation of a nut of six sides of 10-14 N · m.
Withdraw the electric motor of a cleaner from rear glass, having put two pins of the fixation out, and separate the capture of contact.
Moment of an inhalation of pins of fixation of the electric motor of a cleaner from rear glass of 7-11 N · m.
The installation is executed as it must be, the return to the removal.
Check of technical condition
Separate the capture of the electric motor of a cleaner from rear glass.
  Fig. 7.69. Contacts of the capture of the electric motor of the mechanism of a cleaner from rear glass: 1 – "+" (in the included ignition); 2 – reverse eletromagnético (high speed); 3 – switch; – I "weigh" 4

Positive is joined ("+") and negative ("-") the captures of the battery recarregável according to the contacts "3" and "4" captures of the electric motor (fig. 7.69).
One convinces of the normal Repair of the electric motor. In the moment of the violation of the work they substitute the electric motor.
Installation of the lever and brush of a cleaner
 Fig. 7.70. To adjust size of the lever and brush from a cloth to rub of fabric

Install the lever and a brush of a cleaner for which the size (fig. 7.70) was the same as 43-53 mm.
 Fig. 7.71. Installation of a jet of a lavador from rear glass in a zone of sprinkling of the washable liquid

Establish a jet of a lavador from rear glass according to the specified fig. to 7,71 sizes.

 Electric motor of a lavador from rear glass
Removal and installation
Desconecte a wire of the negative capture of the battery recarregável.
Desconecte a hose of a lavador of a tank and separate the capture of electric motor.
Withdraw a reservoir of lavador, having put two pins of the fixation out.
The installation is executed as it must be, the return to the removal.
Check of technical condition
Without withdrawing the electric motor of a reservoir of lavador, fill a tank of the water.
   Fig. 7.72. Contacts of the capture of the electric motor of a lavador from rear glass: 1 – lavador of windshield ("+"); – I "weigh" 2; 3 – lavador of rear glass ("+")

One adheres "more" ("+") and "less" ("-") the captures of the battery recarregável respectively to contacts "3" and "2" captures of the electric motor (fig. 7.72) and be convinced that the electric motor works, and the water is sprinkled by a jet of lavador.
One convinces of the normal Repair of the electric motor.