8.5. Removal and installation of elements of the equipment of hall and finish of a hoof of the car

 Central consolation of the panel 
      Fig. 8.62. Central consolation of the panel: 1 – gear that moves covering of lever; 2 – switches of heating of seats; 3 – easier; 4 – revetments of the central consolation; 5 – contact with captures of elements of the heating of seats; 6 – covering; 7 – central consolation

The central consolation of the panel is shown in the fig. 8.62.
Removal and installation
Fig. 8.63. Screws of fixation of the consolation

Unscrew two screws of the fixation of the consolation (fig. 8.63).
Install the lever of the walk of the system of brakes of parking in the extreme superior situation and withdraw the consolation, having lifted it for a rear part.
Separate the capture of contact of the easiest.
The installation is executed as it must be, the return to the removal.

Panel

              Fig. 8.64. Panel: 1 – covering of a column of direction; 2 – column direction; 3 – peak of a combination of devices; 4 – devices combination; 5 – mouth of side of system of ventilation of a body; 6, 12 – face that is in front of the panel; 7 – arm; 8 – panel; 9 – block of system sound; 10 – mouth of side of system of ventilation of a body; 11 – arm; 13 – article box; 14 – arm of fixation of the block of the system sound; 15 – central consolation of the panel; 16 – switches of the central consolation of the panel; 17 – lower revetment of the panel

The panel is shown in the fig. 8.64.
The panel happens in the form of a uniform detail and a metal frame represents with the power absorbent layer of the foam of poliuretano what from the exterior side is re-investigated with a decorative movie.

       PREVENTION
When it uses the screwdriver it rolls his cloth of edge up not to damage a detail. Since the hand protection put gloves.

 Removal and installation of a combination of devices
Establish a column of direction in the lowest situation.
  Fig. 8.65. Screw of fixation of a peak of a combination of devices: 1 – screw of fixation of a peak of a combination of devices; 2 – peak of a combination of devices

Withdraw a peak of a combination of devices, having unscrewed the screw of fixing (fig. 8.65).
Unscrew screws of the fixation of a combination of devices and take away that of a nest.
Fig. 8.66. Contact with captures of a combination of devices

The separated captures of contact of a combination of devices and they withdraw a combination of devices (fig. 8.66).
The installation is executed as it must be, the return to the removal.

       PREVENTIONS
When it uses the screwdriver it rolls his cloth of edge up not to damage a detail. Since the hand protection put gloves.
It looks to the damnification of the panel.

 Removal and installation of the lowest revetment of the panel
Establish a column of direction in the superior situation.
Withdraw the revetment of a threshold of a door and the lowest revetment of an advanced torture.
Fig. 8.67. Covering of the block of locks of security of the panel

Discover the block of locks of security (fig. 8.67).
 Fig. 8.68. The elements of the fixation of the lowest revetment of the panel (they are specified by firearms): 1 – taken of autodiagnostic one

Put out two pins and two screws of the fixation of the lowest revetment, desconecte the case of the capture of the autodiagnostic one and a thread of the walk of the lock of a monk's hood and withdraw the lowest revetment of the panel (fig. 8.68).
The installation is executed as it must be, the return to the removal.

       PREVENTIONS
When it uses the screwdriver it rolls his cloth of edge up not to damage a detail. Since the hand protection put gloves.
It looks to the damnification of the panel.

 Removal and installation of a box of article
Open a box of article.
Fig. 8.69. The bearers of a box of article (they are shown by firearms)

Remove bearers of a box of article (fig. 8.69).
Take away a box of article, having unscrewed screws of the fixation of knots of a box.
The installation of a box of article is executed as it must be, the return to the removal.

  Removal and installation of the lowest revetment of the central consolation of the panel
Withdraw the lowest revetment of the central consolation of the panel, having unscrewed the screw of fixation of the driver.
The installation of the lowest revetment of the central consolation of the panel is executed as it must be, the return to the removal.

       PREVENTION
When it uses the screwdriver it rolls his cloth of edge up not to damage a detail. Since the hand protection put gloves.
It looks to the damnification of the panel.

  Removal and installation of revetment of the central consolation of the panel
Withdraw a box of article.
Withdraw the lowest revetment of the central consolation of the panel.
Desconecte threads of the walk of doors of the system of ventilation and heating of the hall of the corresponding levers of the walk of doors.
 Fig. 8.70. Hints of threads of the walk of doors of system of ventilation and heating of hall

Through an artist of streaptise they withdraw the central consolation, from his lowest part (fig. 8.70).
The separated captures of contact of switches of the central consolation of the panel and they withdraw the revetment of the central consolation.
The installation of the revetment of the central consolation of the panel is executed as it must be, the return to the removal.

       PREVENTION
When it uses the screwdriver it rolls his cloth of edge up not to damage a detail. Since the hand protection put gloves.
It looks to the damnification of the panel

 Removal and installation of the block of the system sound
Withdraw a box of article.
Withdraw the lowest revetment of the panel.
Withdraw the revetment of the central consolation of the panel.
Fig. 8.71. Screws of fixation of the block of the system sound

Unscrew screws of the fixation of the block of the system sound (fig. 8.71).
The separated captures of contact of the block of the system sound and they withdraw it.
The installation of the block of the system sound is executed as it must be, the return to the removal.

       PREVENTION
When it uses the screwdriver it rolls his cloth of edge up not to damage a detail. Since the hand protection put gloves.
It looks to the damnification of the panel.

 Removal and installation of a ray of the panel
Withdraw a steering-wheel with the module of cushion of security.
Withdraw the lowest revetment of the panel.
Withdraw a box of article.
Withdraw the lowest revetment of the central consolation of the panel.
Withdraw the revetment of the central consolation of the panel.
Withdraw the system sound.
Withdraw revetments of face of the panel.
  Fig. 8.72. Contact with the capture of the antenna of the system sound: 1 – windshield; 2 – contact with the capture of the antenna of the system sound; 3 – panel

Separate the capture of a radio-antenna (fig. 8.72).
Withdraw the panel, having put out nine pins of his fixation: four pins of the fixation are located (in two) under revetments of face of the list.
The installation of the panel is executed as it must be, the return to the removal.

Details of finish of hall

    Fig. 8.73. Revetments of interior of cars with a body of five doors: 1 – revetment of an advanced torture of a body; 2 – revetment of a threshold of an advanced door; 3 – top that is in front of a middle torture of a body;
     4 - revetment of a threshold of a back door; 5 – revetment of a rear torture of a body; 6 – behind revetment of the compartment of baggage; 7 – shelf of the compartment of baggage; 8 – side that it faces of the baggage compartment; 9 – lower revetment of a middle torture of a body; 10 – lower revetment of an advanced torture of a body

            Fig. 8.74. Revetments of interior of cars with a body of three doors: 1 – revetment of an advanced torture of a body; 2 – revetment of a threshold of a door; 3 – top that is in front of a side wall; 4 – revetment of a side wall; 5 – side that it faces of the baggage compartment; 6 – shelf of the compartment of baggage; 7 – behind revetment of the compartment of baggage; 8 – carpet of the compartment of baggage; 9 – behind revetment of a threshold; 10 – lower revetment of an advanced torture of a body

The revetments of the interior of cars with a body of five doors are shown in the fig. 8.73, cars with a body of three doors — in fig. 8.74.

       TO OBSERVE
Before the revetments removal they remove day-pupil a selante.

Revetment of an advanced torture of a body
Withdraw the revetment of a torture advanced with the help of an artist of streaptise of revetments.

Revetment of a threshold of an advanced door
Cars with a body of five doors
Withdraw the revetment of a threshold of an advanced door, having desconectado three clips of the fixation.
The installation is executed as it must be, the return to the removal.
Cars with a body of three doors
Fig. 8.75. Clip of fixation of revetment of a threshold of an advanced door

Withdraw the revetment of a threshold of an advanced door, having desconectado five clips of fixing (fig. 8.75).
The installation is executed as it must be, the return to the removal.

Lower revetment of an advanced torture
Withdraw the revetment of a threshold of an advanced door.
Withdraw the lowest revetment of an advanced torture, having desconectado a clip of his fixation.
The installation is executed as it must be, the return to the removal.

Revetment of a threshold of a back door
Cars with a body of five doors
Fig. 8.76. Fastenings of revetment of a threshold of a back door

Withdraw the revetment of a threshold of a back door, having unscrewed screws of the fixation and having desconectado the bearer (fig. 8.76).
The installation is executed as it must be, the return to the removal.
Cars with a body of three doors
Fig. 8.77. Fastenings of revetment of a threshold of a back door

Withdraw behind the revetment of a threshold, having unscrewed screws of fixing (fig. 8.77).
The installation is executed as it must be, the return to the removal.

 Lower revetment of a middle torture of a body
Withdraw the revetment of a threshold of an advanced door.
Withdraw the revetment of a threshold of a back door.
Fig. 8.78. Pin of the lowest fixation of a belt of seat of a front seat

Fig. 8.79. Removal of the lowest revetment of a middle torture of a body

Put out a pin of the lowest fixation of a belt of seat (fig. 8.78) of a front seat, desconecte a clip and withdraw the lowest revetment of a middle torture (fig. 8.79).
Moment of an inhalation of a pin of the lowest fixation of a belt of seat of a front seat of 40-50 N · m.
The installation is executed as it must be, the return to the removal.

 Top that is in front of a middle torture of a body
Withdraw the revetment of a threshold of an advanced door.
Withdraw the revetment of a threshold of a back door.
Withdraw the lowest revetment of a middle torture.
Withdraw the revetment of the superior fixation of a belt of seat of a front seat, put a pin of the fixation out and withdraw the revetment of top of a middle torture.
Moment of an inhalation of a pin of fixation of a belt of seat of a front seat of 40-50 N · m.
The installation is executed as it must be, the return to the removal.

  Revetment of a side wall (cars with a body of three doors)
Withdraw ahead the revetment of a threshold.
Withdraw behind the revetment of a threshold.
Withdraw the revetment of a pin of the fixation of a guide of a belt of seat.
Put out a pin of the lowest fixation of a belt of seat and the screw, withdraw the revetment of a side wall.

 Shelf of the compartment of baggage
Desconecte the ropes of property of the shelf and withdraw the shelf, having pulled it.
The installation of the shelf is executed as it must be, the return to the removal.

 Backwards revetment of the compartment of baggage
Withdraw the shelf of the compartment of baggage.
Withdraw a carpet of the half of the compartment of baggage.
Withdraw behind the revetment of the compartment of baggage, having unscrewed screws they fix.
The installation is executed as it must be, the return to the removal.

 Side that it faces of the baggage compartment
Withdraw the revetment of a threshold of a back door.
The distant form sits down a few back ahead.
Withdraw a carpet of the compartment of baggage.
Withdraw behind the revetment of the compartment of baggage.
Withdraw the lamp of lighting of the compartment of baggage.
 Fig. 8.80. Elements of fixation of side that it faces of the compartment of baggage of cars with a body of five doors

 Fig. 8.81. Elements of fixation of side that it faces of the compartment of baggage of cars with a body of three doors

Put out pins of the fixation of the half of the compartment of baggage, weaken an inhalation of a pin of the lowest fixation of a belt of seat of a rear seat and through an artist of streaptise they withdraw the revetment of side of the compartment of baggage (fig. 8.80 and 8.81).
The installation is executed as it must be, the return to the removal.

Revetment of a rear torture of a body
Cars with a body of five doors
Fig. 8.82. A pin of the lowest fixation of a belt of seat of a rear seat (it is specified by an arrow)

Put out a pin of the lowest fixation of a belt of seat of a rear seat (fig. 8.82).
Put out a pin of the fixation of a belt of seat of the middle place of a rear seat.
Fig. 8.83. Removal of revetment of a rear torture of a body

Through an artist of streaptise they withdraw the revetment of a rear torture of a body (fig. 8.83).
The installation is executed as it must be, the return to the removal.
Cars with a body of three doors
Withdraw behind the revetment of a threshold.
Withdraw the revetment of a side wall.
Withdraw behind the revetment of the compartment of baggage.
Withdraw the revetment of side of the compartment of baggage.
Unscrew two screws, put out a pin of the fixation of a belt of seat of the middle place of a few back they seat and withdraw the revetment of a rear torture of a body.

Peaks of protection of the sun
Unscrew screws of the fixation of a peak of protection of the sun, remove a peak and the bearer.
The installation is executed as it must be, the return to the removal.

Handrail
The revetment leads to the part of the screw of the fixation of a handrail, when the screwdriver hooked it up.
Fig. 8.84. The screws of the fixation of a handrail (they are shown by firearms)

Withdraw a handrail, having unscrewed screws of fixing (fig. 8.84).
The installation is executed as it must be, the return to the removal.

Consolation ceiling
Fig. 8.85. Removal of the lens of a plafond of lighting of hall

Withdraw the lens of a plafond of the lighting of the hall, when the screwdriver hooked it up exactly with the apartment shliyets (fig. 8.85).
Fig. 8.86. Pins of fixation of the consolation of a roof

Put out two pins of the fixation of the consolation (fig. 8.86), when the contact capture was separated and they withdraw the consolation of roof.
The installation is executed as it must be, the return to the removal.

Articles of tapestry of roof
Since the removal of a few articles of tapestry of a roof withdraws the next details:
– front seats;
– behind I settle;
– roof consolation;
– revetments of advanced tortures of a body;
– revetments of thresholds of advanced doors;
– revetments of thresholds of back doors;
– belts of seat of front seats;
– more low and superior revetments of middle tortures of a body;
– fastenings more basses of belts of seat of a rear seat;
– behind revetment of the compartment of baggage;
– fixation of a belt of seat of the middle place of a rear seat;
– revetments of side of the compartment of baggage;
– revetments of rear tortures of a body;
– peaks of protection of the sun and handrail.
Withdraw a few articles of tapestry of roof, having desconectado bearers.
The installation is executed as it must be, the return to the removal.

Seats
Front seats
     Fig. 8.87. Front seat: 1 – they head the restriction; 2 – seatback; 3 – doorknob of agreement of an angle of canvas of a seatback; 4 – doorknobs of agreement of longitudinal provision of a seat; 5 – seat the sled; 6 – seat the pillow

The front seat is shown in the fig. 8.87.
Removal and installation
Put out four pins of the fixation of a front seat.
Moment of an inhalation of pins of fixation of a front seat of 35-55 N · m.
Separate the capture of contact of a lamp of control of I do not belt of fixed seat and withdraw a front seat.
The installation of front seats is executed as it must be, the return to the removal.

Subsequent seat
Removal and installation
Fig. 8.88. Pins of fixation of a rear seat

Put out four pins of the fixation of a rear seat (fig. 8.88).
Moment of an inhalation of pins of fixation of a rear seat of 35-55 N · m.
Put a rear seat and take away it of the car for an entry.

Seat belts
Measured by precaution in the moment of the handling of belts of seat
with a mechanical prednatyazhitel
After the Repair of a prednatyazhitel of a reuse of belt of a belt is not allowed, substitute a new belt.
In the moment of the removal of a belt they do not pull for strips — it can cause the chance Repair of a prednatyazhitel, the damage of details and a hand damage.
To be demolished and the repair of a prednatyazhitel is not allowed.
During the installation of a belt after a vvertyvaniye (without inhaling) a pin of the fixation it is necessary to roll up not less than 500 mm of a belt in the roll (after installation to be able to stretch out of the roll).
After the installation of a belt and a tug of the roll more than 2.000 mm of a belt (from the center of a plate of the lowest fixation to the center of the roll) the small break of the enemy lines can cause the Repair of a prednatyazhitel.
The height of the installation of a prednatyazhitel must not exceed 40 cm.
Do not take any more than a prednatyazhitel in the hand.

   Measured by precaution in the moment of the handling of belts of seat with a pyrotechnic prednatyazhitel
After the Repair of a prednatyazhitel of a reuse of belt of a belt is not allowed, substitute a new belt.
In the moment of the removal of a belt they do not pull for strips — it can cause the chance Repair of a prednatyazhitel, the damage of details and a hand damage.
To be demolished and the repair of a prednatyazhitel is prohibited.
Adhere to battery recarregável only in the ending of the installation of a prednatyazhitel.
In the moment of the removal of a prednatyazhitel they carry out the next thing:
– it is convinced what the power provision if desconecta and the ignition puts out;
– desconecte a wire of the negative capture of the battery recarregável;
– wait not less than a minute;
– separate the capture of contact of a creator of gas, put a pin of the fixation out and withdraw a prednatyazhitel.
The installation is executed as it must be, the return to the removal.

       PREVENTION
Roll the cloth up to screwdriver used during the work or an artist of streaptise not to damage a detail.

 Removal and installation of belts of seat of front seats
Before the removal of a belt they withdraw the next details:
– revetment of a threshold of an advanced door;
– revetment of a threshold of a back door;
– lower revetment of a middle torture of a body;
– top that is in front of a middle torture of a body.
Withdraw a belt of seat of a front seat.
The installation is executed as it must be, the return to the removal.

  Removal and installation of belts of seat of places of side of a rear seat
Before the removal of a belt they withdraw the next details:
– behind revetment of the compartment of baggage;
– side that it faces of the baggage compartment;
– revetment of a rear torture of a body.
Take away a belt of the place of side of a rear seat.
The installation is executed as it must be, the return to the removal.
Removal and installation of a belt of seat of the middle place of a rear seat
Before the removal of a belt they withdraw the next details:
– behind revetment of the compartment of baggage;
– side that it faces of the baggage compartment;
– revetment of a rear torture of a body.
Take away a belt of the middle place of a rear seat.
The installation is executed as it must be, the return to the removal.