8.4. Removal and installation of extern elements of a hoof of the car

Bumpers front line player

        Fig. 8.1. Bumpers front line player: 1 – the covered list; 2 – bearer; 3 – decorative bedcover of revetment of bumpers; 4 – front guard; 5 – revetment of bumpers; 6 – bumpers ray; 7 – superior arm of revetment of bumpers; 8 – electric heater frame

Bumpers front line player of the car shows off in the fig. 8.1.
Bumpers front line player of the car is composed of a ray, the superior arm of bumpers and plastic revetment. Since an element of power of bumpers serves the metal ray that it fixes to an electric heater frame. The revetment of bumpers fixes to the superior arm of the revetment of bumpers, dispatch wings and the lowest part of a frame of an electric heater. In revetment of a few lights of thick fog of bumpers and decorative bedcovers of the revetment they are established.

Front revetment of bumpers
Removal
Open a monk's hood.
Fig. 8.2. Pins of fixation of revetment of bumpers

Put two pins out of fixing located in the revetment of bumpers behind the grills of an electric heater (fig. 8.2).
Fig. 8.3. The pins of the fixation of a front guard of bumpers (they are specified by firearms)

Put out pins of the fixation of a front guard of bumpers (fig. 8.3).
Fig. 8.4. The screws of side of the fixation of the revetment of bumpers (they are specified by firearms)

Unscrew the screws of side (in three screws of each party) located in the left and on the right in niches of advanced wheels (fig. 8.4).
Unscrew the screws located in the left and on the right behind side faces of the revetment of bumpers.
Unscrew two screws of the lowest fixation of the revetment of bumpers to an electric heater frame.
The separated captures of contact of lights of thick fog and exactly they withdraw the revetment of bumpers so that they do not damage a painting and the covering of varnish of advanced wings.
Installation
Together with the spectator exactly they lift the revetment of bumpers in the superior arm of the revetment.
Of down they adhere taken of contact of lights of thick fog and I wrap up two screws of the lowest fixation of the revetment of bumpers to an electric heater frame.
The coat locates the screws of the left and right parties of the car behind side faces of the revetment of bumpers.
I wrap up the screws of side (in three screws of each party) located in the left and on the right in niches of advanced wheels.
Pins of coat of fixation of a front guard of bumpers.
I wrap up two pins of fixing located in the revetment of bumpers behind the grills of an electric heater.

Front ray of bumpers
Removal
Open a monk's hood.
Withdraw the revetment of bumpers.
Fig. 8.5. Pins of side of fixation of a ray of bumpers

Put out the pins of side of the fixation of a ray of bumpers located in the left and on the right (fig. 8.5).
Fig. 8.6. Central pins of fixation of a ray of bumpers

Put out the central pins of the fixation of a ray of bumpers and withdraw a front ray of bumpers (fig. 8.6).
Installation
Together with the spectator exactly they bring a ray of bumpers to the central arm of a ray in an electric heater frame, combine openings of fixation and acquire pins of fixation.
Combine openings of pins of side of the fixation of a ray of bumpers (in the left and on the right) with openings in a frame of an electric heater and acquire pins of fixation.
Level a ray of bumpers about a hoof of the car and hold tight all the pins of the fixation of a ray.
Establish the revetment of bumpers.

Brims
The niches of advanced wheels of the car are protected by plastic brims of punches of gravel and blow of the dirt. The brims fix screws to an internal part of otbortovka of an arch of wheel, the front revetment of bumpers and a fender of an advanced wing. The brim has three points of the fixation of the installation of an apron of antisneeze.

Bumpers bottom
         Fig. 8.7. Bumpers bottom: 1 – revetment of bumpers; 2 – decorative bedcover of revetment of bumpers; 3 – superior arm of revetment of bumpers; 4 – the power absorbent bumpers element; 5 – superior arm of revetment of bumpers; 6 – bumpers ray; 7 – lower arms of a ray of bumpers

One shows bumpers bottom in the fig. 8.7.
The rear drawing of bumpers is similar to a front drawing of bumpers, except the existence in bumpers bottom of the power absorbent element. Bumpers bottom of the car one composes of a ray, the superior arms of the revetment of bumpers, the inferior arms of the revetment of bumpers, the power absorbent element and revetment of plastic of bumpers. It serves of an element of power of bumpers
the metal ray that it fixes to a rear part of a hoof of the car. The revetment of bumpers fixes to the top and inferior arms of the revetment of bumpers, rear wings. In the revetment of bumpers the lamp of thick fog and the decorative bedcovers of the revetment are established.

Rear revetment of bumpers
Removal
Open a back door.
Fig. 8.8. Superior screws of fixation of bumpers bottom

Unscrew four superior screws of the fixation of bumpers (fig. 8.8).
Unscrew two screws of the fixation of the revetment of bumpers located in rear wheel niches from above in an union of the revetment and arches of rear wings.
Desconecte the capture of contact of a rear lamp of thick fog.
  Fig. 8.9. Pins of fixation of a ray of bumpers to a body: – they contact 1 with the capture of a rear lamp of thick fog

Put out pins of the fixation of a ray of bumpers under his revetment and withdraw bumpers joined bottom (fig. 8.9).
Separate revetment and a ray of bumpers, having unscrewed screws of fixation of revetment to the top and inferior arms of revetment of bumpers.
Installation
Establish the revetment of bumpers in a ray of bumpers so that the openings in the top and inferior arms of the fixation of the revetment and in the revetment coincided. Acquire screws of fixation. Check the fairness of the mutual provision of the revetment and a ray of bumpers, hold tight screws of fixation.
Together with the spectator they bring bumpers bottom joined a rear part of a body and openings of fixation of association in arms of a body and a ray of bumpers.
Acquire pins of the fixation of a ray of bumpers.
Level bumpers about a hoof of the car and hold tight pins of fixation.
I wrap up two screws of fixation of revetment of bumpers located in rear wheel niches from above in an union of revetment and arches of rear wings.
I wrap up four superior screws of fixation of bumpers.
If it does not get the last Repair to happen because of the openings discrepancy, to weaken pins of the fixation of bumpers to a body and, moving bumpers joined, carry out the coincidence of openings.
Join the capture of contact of a rear lamp of thick fog.

Monk's hood
Removal and installation of a monk's hood
It executes the removal and the installation of a monk's hood with the spectator.
Desconecte a hose of lavador of windshield of a jet and a collar of the fixation of a hose of a reverse side of a monk's hood.
Withdraw a monk's hood, having put out two pins of the fixation of knots.
The installation of a monk's hood is executed as it must be, the return to the removal.
Agreement of provision of a monk's hood
Weaken an inhalation of pins of the fixation of knots of a monk's hood and adjust the provision of a monk's hood, moving it vver-hvniz and on the left on the right.
Fig. 8.10. Buffers of monk's hood

Adjust the provision of a monk's hood in the rotation of height of buffers of a monk's hood (fig. 8.10).

Lock of monk's hood
Removal
Fig. 8.11. Screws of fixation of a covering of the lock of a monk's hood

Withdraw a covering of lock of monk's hood, having unscrewed screws of fixing (fig. 8.11).
Put out three pins of the fixation of the lock of a monk's hood.
Moment of an inhalation of pins of fixation of the lock of a monk's hood of 7-11 N · m.
Fig. 8.12. Removal of a thread of the walk of the lock of a monk's hood

Desconecte to lock and a thread of the walk of the lock, withdraws the lock of a monk's hood (fig. 8.12).
The installation is executed as it must be, the return to the removal.

Agreement of position of the lock of a monk's hood
Lightly weaken an inhalation of pins of the fixation of the lock of a monk's hood.
Fig. 8.13. Agreement of position of the lock of a monk's hood

Adjust the position of the lock of a monk's hood, moving it down or on the left on the right (fig. 8.13).

Back door

             Fig. 8.14. Back door: 1 – clandestine tapestry articles; 2 – the direction emphasis; 3 – door knots; 4 – clandestine plunderer; 5 – decorative mistake; 6 – extern doorknob of a door of a few back; 7 – lock the switch; 8 – lock the armband; 9 – doorknob of desprendimento of emergence of the lock; 10 – lock the electric walk; 11 – lock; 12 – electric motor of a cleaner from rear glass; 13 – selante clandestine

The door of a few back is shown in the fig. 8.14.
Removal and installation
It executes the removal and the installation of a door of a few back for the spectator.
Withdraw an emphasis filled out with gas of a door of a few back.
Put out pins of the fixation of knots of a door of a few back, desconecte an electrical system and withdraw a back door.
The installation is executed as it must be, the return to the removal.
Clandestine tapestry articles
Unscrew screws of the fixation of a few articles of tapestry of a door of a few back.
  Fig. 8.15. Removal of a few articles of tapestry of a door of a few back: 1 – latches of clandestine articles of tapestry; 2 – artist of streaptise of latches of a few articles of tapestry of a door of a few back

Through an artist of streaptise they withdraw latches of the fixation of a few articles of tapestry of a door of a few back (fig. 8.15).
The installation is executed as it must be, the return to the removal.

 Detergent from rear glass
Withdraw a few clandestine articles of tapestry.
 Fig. 8.16. The most clean glass lever with a brush

Withdraw the most clean lever from glass with a brush (fig. 8.16).
Withdraw the electric motor from cloth to rub of fabric, having put pins out they fix from a reverse side of a door of a few back.
Moment of an inhalation of pins of fixation of the electric motor from a cloth to rub of fabric of 7-11 N · m.
The installation is executed as it must be, the return to the removal.

 Electric drive of the lock and switch of the lock
Withdraw a few clandestine articles of tapestry.
Desconecte the sketch of the electric walk of the switch of the lock and withdraw the electric walk and a larva of the lock, having put pins out they fix. In the moment of the removal of the switch of the lock lightly they divert it.
The installation is executed as it must be, the return to the removal.

Clandestine lock
Withdraw a few clandestine articles of tapestry.
Desconecte the sketch of the walk of the switch of lock.
Fig. 8.17. Sketch of the extern doorknob of a door

Desconecte the sketch of the extern doorknob of a door (fig. 8.17).
Fig. 8.18. Pins of fixation of the lock of a door

Withdraw the lock of door, having put pins out of fixing (fig. 8.18).
The installation is executed as it must be, the return to the removal.

Extern doorknob of a door of a few back
Withdraw a few clandestine articles of tapestry.
 Fig. 8.19. Extern doorknob of a door of a few back: 1 – decorative bedcover of the extern doorknob of a door;
  2 - extern list of a door of a few back; 3 – extern doorknob of a door of a few back

Put out nuts of the fixation of a decorative mistake and the extern doorknob of the interior of a door, desconecte the sketch of the walk of the lock and withdraw a decorative mistake and the extern doorknob (fig. 8.19).
Withdraw lamps of the lighting of the plate of register, having unscrewed screws they fix.
The installation is executed as it must be, the return to the removal.

 Agreement of provision of a door of a few back

Fig. 8.20. Agreement of provision of an armband of the lock of a door of a few back

Adjust the provision of a door of a few back about a body opening, moving an armband of lock down or on the left on the right (fig. 8.20).
Fig. 8.21. Agreement of provision of knots of a door of a few back

Adjust a slit between a door of a few back and a body, modifying the provision of knots of a door (fig. 8.21).
Adjust doors vystupany of a few back about a rotation of body of the left or right buffers.

Doors
Dispatch door
              Fig. 8.22. Dispatch the door: 1 – door list; 2 – limitador of door course; 3 – list of an advanced door; 4 – extern doorknob of a door; 5 – lock the switch; 6 – selante of door glass; 7 – behind fillet from glass of a door; 8 – covering of sketch of extinguishment of the lock; 9 – door lock; 10 – internal doorknob of a door; 11 – articles of tapestry of door; 12 – doorknob of regulator of window; 13 – window regulator; 14 – door glass;
 15 - dispatch the fillet from glass of a door

The advanced door is shown in the fig. 8.22.
 Removal and installation of a few articles of tapestry of an advanced door

  Fig. 8.23. Screw of fixation of the internal doorknob of a door: 1 – sketch of extinguishment of the lock; 2 – sketch of the walk of the doorknob of the lock

Unscrew screws of the fixation of the internal doorknob of a door (fig. 8.23).
Fig. 8.24. The removal of a few articles of tapestry of a door (the firearms showed screws of the fixation of a few articles of tapestry of a door)

Unscrew screws of the fixation of a few articles of tapestry of a door, exempt of bearers through an artist of streaptise a few articles of tapestry and withdraw his (fig. 8.24).
Separate the capture of contact of the switch of a regulator electrowindow.

       TO OBSERVE
In the moment of the removal of a few articles of tapestry they roll the cloth up a part of work of an artist of streaptise not to damage the painted surfaces.

Remove the bearer of a few articles of tapestry of a door (having unscrewed two screws), a moisture protective apron, the loudspeaker (having unscrewed four screws) and separate the capture of contact of the loudspeaker.
The installation is executed as it must be, the return to the removal.

Glass and regulator of window
Withdraw a few articles of tapestry of door, the bearer of a few articles of tapestry, a moisture protective apron and the loudspeaker.
To hold tight the switch of regulator of window carefully lowers the glass for which in an opening of a box of a door there were both pins of the fixation from glass.

  Fig. 8.25. The pins of fixation from glass (they are shown by firearms): – I glaze 1; 2 – window regulator

Put out pins of the fixation from glass (fig. 8.25).
Moment of an inhalation of pins of fixation from glass of 8-12 N · m.
 Fig. 8.26. The scheme of the extraction flew below a door

Bring the glass out of a selante and carefully take out of an opening (fig. 8.26).

       PREVENTION
Be careful — do not leave the glass in a box of a door and it does not scratch it.

Separate the capture of electric motor of regulator of window.
 Fig. 8.27. Nuts of fixation of the mechanism of a regulator of window and electric motor

Withdraw a joined regulator of window, having put out nuts of the fixation of the mechanism of a regulator of window and a nut of the fixation of the electric motor (fig. 8.27).
Moment of an inhalation of nuts of fixation of the mechanism of a regulator of window of 4-6 N · m.
Withdraw an advanced fillet from glass of a door, having put the fixation of nuts out.
Moment of an inhalation of nuts of fixation of an advanced fillet from glass of a door of 4-6 N · m.
Fig. 8.28. Nuts of fixation of a rear fillet from glass of a door

Withdraw a rear fillet from glass of a door, having put nuts out of fixing (fig. 8.28).
Moment of an inhalation of nuts of fixation of a rear fillet from glass of a door of 4-6 N · m.
The installation is executed as it must be, the return to the removal.

Lock and extern doorknob of a door
Withdraw a few articles of tapestry of an advanced door, the bearer of a few articles of tapestry, a moisture protective apron and the loudspeaker.
Withdraw the glass and a regulator of window.
  Fig. 8.29. The removal of a covering of the sketch of the extinguishment of the lock (the screws of the fixation of a covering are shown by firearms): 1 – artist of streaptise of a covering of sketch of extinguishment of the lock; 2 – covering of sketch of extinguishment of the lock

Unscrew screws of the fixation of a covering of the sketch of the extinguishment of the lock and through an artist of streaptise they withdraw a covering (fig. 8.29).
Fig. 8.30. Nuts of fixation of the lock of a door

Unscrew three screws of the fixation of the lock of a door (fig. 8.30).
Moment of an inhalation of nuts of fixation of the lock of a door of 8-11 N · m.
Put out pins of the fixation of the extern doorknob of a door, desconecte the sketch and withdraw the extern doorknob.
Moment of an inhalation of pins of fixation of the extern doorknob of a door of 8-11 N · m.
The installation is executed as it must be, the return to the removal.

Agreement of a door
Fig. 8.31. Door knots

Lightly weaken an inhalation of pins of the fixation of knots of a door and adjust his situation, moving a door for an entry down or on the left on the right (fig. 8.31).
Fig. 8.32. An armband of lock of door (the firearms showed screws of the fixation of an armband of the lock)

Adjust the provision of an armband of the lock (fig. 8.32), having weakened lightly an inhalation of screws of fixation and movement of an armband down or on the left on the right.

Door glass
Weaken an inhalation of pins of the fixation from glass to a fixation plate in a window regulator and adjust the provision from glass, moving it above or down.
Weaken an inhalation of pins of the fixation of a regulator of window and adjust the provision of a regulator of window with the glass, moving a regulator of window down and on the left on the right.

Back door
            Fig. 8.33. Back door: 1 – door list; 2 – limitador of door course; 3 – selante of door glass; 4 – motionless glass; 5 – covering of sketch of extinguishment of the lock; 6 – door lock; 7 – articles of tapestry of door; 8 – window regulator; 9 – glass that it lowers of a door; 10 – doorknob of regulator of window; 11 – behind fillet from glass of a door

The back door is shown in the fig. 8.33.

Removal and installation of a few articles of tapestry of a door
Unscrew screws of the fixation of the internal doorknob of a door.
Fig. 8.34. Screws of fixation of a few articles of tapestry of a door

Unscrew screws of the fixation of a few articles of tapestry of a door and through an artist of streaptise they withdraw a few articles of tapestry (fig. 8.34).

       TO OBSERVE
Roll up a part of work of an artist's cloth of streaptise not to damage the painted surfaces.

There withdraws the bearer of a few articles of tapestry of a door, a moisture protective apron, the loudspeaker and separate the capture of contact of the loudspeaker.
The installation is executed as it must be, the return to the removal.

Glass and regulator of window
Withdraw a few articles of tapestry of door, the bearer of a few articles of tapestry, a moisture protective apron and the loudspeaker.
Carefully establish when there is insisting the glass of switch of regulator of window on the necessary situation.
Fig. 8.35. Nuts of fixation of a regulator of window

Put out three nuts of the fixation of a regulator of window (fig. 8.35), lightly weaken an inhalation of the fourth nut, soon desconecte the bearer from glass of a regulator of window.
Moment of an inhalation of nuts of fixation of a regulator of window of 8-12 N · m.
Put out pins of the fixation of a fillet from glass.
Moment of an inhalation of pins of fixation of a fillet from glass of 8-12 N · m.
Carefully take away the glass of a box of door. Withdraw a regulator of window, having put out the fourth nut of his fixation.

       PREVENTION
Be careful — do not leave and it does not scratch the glass.


Fig. 8.36. Removal of a selante from glass

Take away a selante from glass (fig. 8.36) of a fillet.
Fig. 8.37. Screw of fixation of the superior fillet

Withdraw the superior fillet, having unscrewed the screw of fixing (fig. 8.37).
The installation is executed as it must be, the return to the removal.

Motionless glass
Withdraw a few articles of tapestry of a back door.
Withdraw the glass and a regulator of window.
Withdraw a fillet from glass.
Fig. 8.38. Removal from motionless glass

Withdraw the motionless glass, to move it in the direction specified the fig. 8.38.
The installation is executed as it must be, the return to the removal.

Lock and extern doorknob of a door
Withdraw a few articles of tapestry of door, the bearer of a few articles of tapestry, a moisture protective apron and the loudspeaker.
Withdraw the glass and a regulator of window.
Fig. 8.39. Screws of fixation of a covering of sketch of extinguishment of the lock

Unscrew screws of the fixation of a covering of the sketch of the extinguishment of the lock (fig. 8.39) and they withdraw a covering through an artist of streaptise.
Fig. 8.40. Screws of fixation of the lock of a door

Separate the capture of the electric motor of a regulator of window and unscrew screws of the fixation of the lock of a door (fig. 8.40).
Moment of an inhalation of screws of fixation of the lock of a door of 8-11 N · m.
Put out pins of the fixation of the extern doorknob of a door, desconecte the sketch, withdraw the lock and the extern doorknob of a door.
Moment of an inhalation of pins of fixation of the extern doorknob of a door of 8-12 N · m.
The installation is executed as it must be, the return to the removal.

Doors agreement
Lightly weaken an inhalation of pins of the fixation of knots of a door and adjust the provision of a door, moving it down or on the left on the right.
Adjust the provision of an armband of the lock, having weakened lightly an inhalation of screws of fixation and movement of an armband down or on the left on the right.

The agreement of the provision of lowering the glass
Withdraw a few articles of tapestry of a door and a moisture protective apron.
Elevator glass.
Lightly weaken an inhalation of nuts of the fixation of a regulator of window.
Move the glass in the direction to a rear part or to an advanced part and hold tight nuts of fixation.
Lower glass.
Weaken an inhalation of nuts of the fixation of a rear fillet.
Move a rear fillet against the stop in a glass edge and hold tight nuts of fixation.
Check the smoothness of the movement from glass.

Decorative doors bedcovers
The decorative doors bedcovers establish in the plastic latches located in the small distance one of other. For the removal of a mistake it is necessary to insert the screwdriver or another convenient instrument between a mistake and a surface of a door. Gradually advancing along a mistake, separate a mistake of a door, surpassing the resistance of latches.
Since the damages prevention in the Repairal time wears protective gloves. Roll up the screwdriver or another instrument used for the removal of a cloth of mistake not to damage a painting and the covering of varnish of a body.
In the moment of the removal of mistakes it looks at the damnification of a painting and covering of varnish of a body.
The bedcovers of doors damaged in the moment of the removal are not subject to the reuse.

Extern rear-view mirror
       Fig. 8.41. Extern rear-view mirror: 1 – decorative mistake; 2 – reflect the case; 3 – reflect the frame; 4 – reflect the element; 5 – frame of an element of mirror; 6 – reflect the base; 7 – remote mistake

The extern rear-view mirror is shown in the fig. 8.41.
Removal
Withdraw an internal decorative bedcover of a mirror of the interior of a door.
Separate the capture of contact of a system of heating and the electric walk of a mirror.
Withdraw a mirror, having put three pins of the fixation out.

 Movable list of a roof (hatch)

   Fig. 8.42. Movable list of a roof: 1 – thread driving; 2 – sheep; 3 – decorative mistake;
               4 - blind protection of the sun; – I glaze 5; 6 – blind the hat; 7 – drives; 8 – armband; 9 – direct the mechanism; 10 – selante; 11 – rail; 12 – arm; 13 – electric motor; 14 – dispatch the tube of branch of drain; 15 – frame; 16 – driving; 17 – unity of control; 18 – deflector; 19 – cork

The movable list of a roof is shown in the fig. 8.42.
The removal and the installation of the hatch were joined
To receive the access to the movable list of a roof it is necessary to withdraw a few articles of tapestry of tiled completely.
For the removal of the joined hatch they withdraw the next details:
– front seats;
– behind I settle;
– roof consolation;
– revetment of advanced tortures of a body;
– revetment of thresholds of advanced doors;
– revetment of thresholds of back doors;
– belts of seat of front seats;
– more low and superior revetments of middle tortures of a body;
– fixation of belts of seat of a rear seat;
– angry revetment;
– fixation of a belt of seat of the middle place of a rear seat;
– revetments of side of the compartment of baggage;
– revetments of rear tortures of a body;
– peaks of protection of the sun and handrail;
– articles of tapestry of roof.
   Fig. 8.43. Hose of water drain and tube of branch of drain: 1 – frame; 2 – water drain the hose

Desconecte the water drain a hose (fig. 8.43).
    Fig. 8.44. Fixation of the movable list of a roof: 1 – glass of the movable list of a roof; 2 – frame; 3 – nuts; – I set pins 4

Withdraw the movable list of a joined roof, having put out nuts of the fixation and a pin (fig. 8.44).
Moment of an inhalation of nuts of fixation of the movable list of a roof of 4-6 N · m.
The installation is executed as it must be, the return to the removal.

Glass of the movable list of a roof

Fig. 8.45. Removal of a decorative mistake:
    1 - I glaze; 2 – deflector; 3 – decorative mistake; 4 – articles of tapestry of roof

Open a blind protection of the sun and through the screwdriver they withdraw a decorative mistake (fig. 8.45).
Fig. 8.46. Nuts of fixation from glass of the movable list of a roof

Withdraw the glass of the movable list of a roof, having put out the fixation of nuts (from the right and left side) (fig. 8.46).
Moment of an inhalation of nuts of fixation from glass of the movable list of a roof of 4-6 N · m.
The installation is executed as it must be, the return to the removal.
Desmontagem
   Fig. 8.47. The nuts of the fixation of the electric motor of the walk of the movable list of a roof (they are shown by firearms): 1 – electric motor; 2 – unity of control; 3 – direct the mechanism

Put out nuts of the fixation of the electric motor of the walk of the movable list of a roof, separate the capture of contact of the unity of control and withdraw the electric motor (fig. 8.47).
Withdraw the unity of control.
Fig. 8.48. Screws of fixation of the mechanism of the walk of the movable list of a roof

Withdraw the mechanism of the walk of the movable list of a roof, having unscrewed screws of fixing (fig. 8.48).
Fig. 8.49. Emphasis of a blind protection of the sun

Withdraw a blind protection of the sun, having withdrawn an emphasis in the end of a rail (fig. 8.49).
Fig. 8.50. Taken care of an armband

   Fig. 8.51. Removal of a guide: 1 – drives; 2 – frame; 3 – armband

Become a guide, when the sheep held tight the screwdriver, a hand pulls out an armband through an opening in a reverse side of a rail then they withdraw a guide, when an armband is maintaining a hand in the moved situation as it is possible besides that (fig. 8.50 and 8.51).
    Fig. 8.52. The removal of the deflector (the screws of the fixation of the deflector are specified by firearms): 1 – rail; 2 – deflector; 3 – cork

Withdraw the deflector, having unscrewed screws they fix (fig. 8.52) on the right and in the left.
Meeting
Install the deflector (having inserted a clip, annex a cork).
  Fig. 8.53. Installation of an armband: 1 – armband; 2 – frame

Insert an armband in a rail (fig. 8.53).

       PREVENTION
Do not readjust at places the left and right armbands.


    Fig. 8.54. Connection of the sheep to a thread: 1 – drives; 2 – igualador; 3 – thread driving

Annex the sheep to a thread. Move an edge of the igualador before the combination with the sheep of a guide (fig. 8.54).
 Fig. 8.55. Preparation of the sheep of installation of a guide in a rail

Arrange an edge of a boot (fig. 8.55) in top, and a boot B pillow down.
     Fig. 8.56. Connection of the sheep with an armband: 1 – drives; 2 – armband; 3 – embroiders; 4 – sheep

Insert a sheep's edge in a groove of an armband (fig. 8.56).
  Fig. 8.57. Installation of a guide in a rail: 1 – support of triangular form

If the preparatory Repairs described in top if they carry out with success, introduce a guide in a rail and an internal support of triangular form in an opening of the lowest rail (fig. 8.57).
Completely a guide introduces in a rail.
    Fig. 8.58. Sheep's shift against the stop in the igualador: 1 – screwdriver; 2 – sheep

The movement of screwdriver the sheep against the stop in the igualador (fig. 8.58).
Fig. 8.59. Protective hats

Establish a blind protection of the sun, insert an emphasis (fig. 8.59).

       PREVENTION
During the installation of a blind trace that the protective hats established confiantemente.

Insert a thread in a tube of mechanism of walk.
Install the mechanism of walk in a hatch frame.
The contact capture installs the electric motor and the unity of control, sole.
 Inicialização of the movable list of a roof after installation

 Fig. 8.60. The administrations of the movement of the hatch in the central consolation of the panel (they are shown by firearms)

Since the inicialização at the same time holds tight switches of the movement of the list of a roof in the longitudinal and vertical directions in the ignition off and the shut list, soon it includes the ignition. At the same time the movable list of a roof has to open lightly automatically, soon to be closed and to remain in a shut position (fig. 8.60).

       TO OBSERVE
The inicialização must be executed in the next cases:
– after confiding or closing of the movable list of a roof manually;
– after details substitution, including the electric motor, the unity of control, driving;
– after elimination of bad functioning of driving of the hatch;
– in the moment of violation of work after substitution of the battery recarregável.
The inicialização executes also after the meeting of the hatch.

 Opening of emergence and close of the hatch 
 Fig. 8.61. Opening of emergence and close of the movable list of a roof

The opening of emergence and the close of the movable list of a roof are shown in the fig. 8.61.
In the shut hatch they introduce a key of six sides in a nest of an end of the electric motor and slowly they make it revolve in the direction of the movement of the pointers of the clock.
The opening of emergence or the close is executed in the moment of the failure of the electric walk or unity of control, for example, when it begins to rain, driving on the road, etc.