4.1. Dispatch the support of the triangular form of interruption

Technical characteristic of an advanced support of the triangular form of interruption
To type
McPherson
Type of telescopic tortures
Hydraulic
Length of the course of a stick of a torture, mm
143
The effort developed by a telescopic torture in a speed of movement of a stick of 0,3 m/s, N (kilogram):
   in the return course
   in the compression course

680±110 (68±11)
220±60 (22±6)
Color of an etiquette
I redden (cars without ABS),
I yellow (cars with ABS)

 Spring length of a support of the triangular form of interruption advanced in a free state and his marking
Models of the cars
Length, mm
Color of an etiquette
For the European countries
1,1 l of MKP
338,6
white-white
1,1 l of AKP, 1,3/1,5 l of MKP
347,7
yellow-white
1,5/1,6 l of DOHC MKP (basic complete set),
1,5/1,6 l of DOHC MKP (other complete sets),
1,5/1,6 l of DOHC AKP
356,8
blue-white
For other countries and the countries of the Middle East
1,1 l of AKP, 1,1 l of AKP (basic complete set)
338,6
white-white
1,1 l of AKP (other complete sets),
1,3/1,5 l of MKP,
347,7
yellow-white
1,3/1,5 l of AKP (basic complete set), 1,5/1,6 l of DOHC MKP 1,3/1,5 of l of AKP (other levels of a complete set), 1,5/1,6 l of DOHC (all the models, except 1,5/1,6 l of DOHC MKP)
356,8
blue-white
Symbols: MKP – cars with the mechanical transmission; AKP – cars with the automatic exchange.

 Spring length of a support of the triangular form of interruption advanced in a free state and his marking
Models of the cars
Length, mm
Etiquettes color
For the European countries of 1,1 l
317,2
white-white
1,3/1,5/1,6 l (all the models)
327,8
yellow-white

 Telescopic torture of an advanced support of the triangular form of interruption

Fig. 4.1. Telescopic torture of an advanced support of the triangular form of interruption: 1 – nut of fixation of the superior support of a torture; 2 – hat; 3 – torture the nut of stick; 4 – superior support of a torture; 5 – superior basic cup of one spring; 6 – protective covering; 7 – buffer of course of compression; 8 – spring of an advanced support of the triangular form of interruption; 9 – lower the basic cup of one spring; 10 – case of torture of support of the triangular form of interruption

The telescopic torture of an advanced support of the triangular form of interruption is shown in the fig. 4.1.

 Removal and installation of a torture of an advanced support of the triangular form of interruption
Removal
Withdraw an advanced wheel.
Without doing excessive efforts, desconecte of a torture of support of the triangular form of interruption the bearer of a hose of brake and the capture of the sensor of the speed of the rotation of a wheel.
Withdraw a cloth to rub of fabric and a covering of a niche of the air entry.
Fig. 4.2. Nuts of fixation of the superior support of a torture of a support of the triangular form of interruption

Put out pins of the fixation of the superior support of a torture of a support of the triangular form of interruption (fig. 4.2).
Fig. 4.3. The nuts of the fixation are resistant supports of the triangular form of interruption to a rotary fist


Withdraw a torture of an advanced support of the triangular form of interruption joined (fig. 4.3).
Installation
 During the installation of a torture it looks that between basic surfaces the foreign objects did not come.
Fig. 4.4. Torture of the stabilizer of angry stability: 1 – torture of the stabilizer of angry stability; 2 – curb the hose; 3 – contact with the capture of the sensor of the speed of the rotation of a wheel

 Annex a hose of brake, the capture of the sensor of the speed of the rotation of a wheel and a torture of the stabilizer of the angry stability (fig. 4.4).
Hold tight connections put the moments supplied down.
Moments of an inhalation, N · м:
Nut of fixation of the superior support of a torture of a support of the triangular form of interruption..... 20-30
The nuts of pins of the fixation are resistant supports of the triangular form of interruption to a rotary fist..... 110-130
Nuts of fixation of fingers of spherical hinges of a torture of the stabilizer of angry stability..... 35-45

To be demolished and meeting of a torture of an advanced support of the triangular form of interruption
Desmontagem
Withdraw a protective covering to screwdriver with a flat edge.
Fig. 4.5. Device of spring compression of a support of the triangular form of interruption

Through J38402, the adaptation of A20 holds tight a spring of support of the triangular form of interruption so that almost completely it withdraws the spring effort of a torture (fig. 4.5).
Put a nut out in a torture stick.

       TO OBSERVE
Do not use the device of shock to the spring compression.

Withdraw the superior support of a support of the triangular form of interruption, a basic cup of one spring, a spring of a support of the triangular form of interruption and a protective covering of a torture.
Use of tortures of a support of the triangular form of interruption
Completely propose a stick of a telescopic torture.
Fig. 4.6. A zone (A) of perforation of an opening of production of gas

Produce the gas of the cylinder of torture, having done an opening (nadpit) in the siege (fig. 4.6).

PREVENTION
The produced gas is harmless, but it is necessary to take steps for precaution in the emission of the formed metal shave.

Check of technical condition
Check the superior support of a torture of a support of the triangular form of interruption of the existence of use or damages.
Check details of rubber to existence of damages or deterioration in properties of the material.
Check a spring of support of the triangular form of interruption the shrinking and the relief.
Fig. 4.7. Check of work of a telescopic torture

Check a telescopic torture to existence of the excessive inflexibility or an exceptional sound in the Repairal time (fig. 4.7).
Meeting
Fig. 4.8. Installation of a pillow of the lowest basic cup of one spring

Establish a pillow of the lowest basic spring cup of a support of the triangular form of interruption, combining edges of pillow with openings of a cup (fig. 4.8).
Establish a protective covering in a torture.
Completely hold tight a spring of support of the triangular form of interruption J38401, adaptation of A2 and establish it in a torture of support of the triangular form of interruption.

       TO OBSERVE
Establish a spring of a support of the triangular form of interruption for an etiquette to colors towards a rotary fist.

Completely spread a stick of a torture out and install the superior basic cup and the superior support of a torture.

       TO OBSERVE
Fig. 4.9. Installation of the superior basic cup of one spring

Combine an opening of D-shaped of the superior basic spring cup of a torture lysky of a stick (fig. 4.9).

When put correctly the top and circles more low of one spring in flutes of the top and lower basic cups, previously a nut insists самоконтрящуюся on a torture stick.
Withdraw J38402, adaptation of A20.
Hold tight самоконтрящуюся a nut the moment of 69-70 N · m.
Put the lubricant in the load of a torture and establish a hat of the superior support of a torture.

PREVENTIONS
Substitute nuts самоконтрящиеся new after each removal.
The worn-out lubricant – NGLI n ° 0 of the chassis or similar.
In the moment of the placing of the lubricating trace that did not climb a pillow of rubber of the superior support.

Lever of support of the triangular form of interruption

Fig. 4.10. Lever of an advanced support of the triangular form of interruption: 1 – torture of the stabilizer of angry stability; 2 – brake disc; 3 – directing sketch; 4 – lever of support of the triangular form of interruption; 5 – esticador; 6 – bar of the stabilizer of angry stability

The lever of an advanced support of the triangular form of interruption is shown in the fig. 4.10.
Removal
Withdraw an advanced wheel.
Fig. 4.11. Vypressovka of a finger of the spherical hinge of a tip of directing the sketch of a rotary fist

Vypressuyte a finger of the spherical hinge of a tip of directing the sketch of a rotary fist through an artist of streaptise of 09568-34000 (fig. 4.11).
Fig. 4.12. Vypressovka of a finger of a spherical support of a rotary fist

  Vypressuyte through an artist of streaptise 09568-34000 spherical support of the lever of a support of the triangular form of interruption (fig. 4.12).
Put out pins of the fixation of a torture of a support of the triangular form of interruption to a rotary fist.
Fig. 4.13. Saylentbloki of the lever of support of the triangular form of interruption: 1 – saylentblok E; 2 – G saylentblok; 3 – esticador; 4 – lever of support of the triangular form of interruption

Put pins of the fixation out of saylentblok of A and G (fig. 4.13) of the lever of a support of the triangular form of interruption.
Withdraw the lever of support of the triangular form of interruption.
Installation
The installation of the lever of a support of the triangular form of interruption is executed as it must be, the return to the removal.
Hold tight connections put the moments supplied down.
Moment of an inhalation, N · м: 
Nuts of fixation of a wheel..... 90-100
Nut of fixation of a finger of a spherical support of the lever of a support of the triangular form of interruption..... 60-72
The pin of the fixation of a saylentblok E (to see the fig. 4.13)..... 95-120
The pin of the fixation of a saylentblok of G (to see the fig. 4.13)..... 130-150
Nuts of fixation of fingers of spherical hinges of a torture of the stabilizer of angry stability..... 35-45

  Substitution of a spherical support and protective covering of a torture of an advanced support of the triangular form of interruption
 Removal of a spherical support and protective covering

Fig. 4.14. Protective covering of a spherical support of the lever of a support of the triangular form of interruption: 1 – they lock the ring; 2 – covering; 3 – screwdriver

Withdraw a protective covering of a spherical support of the lever of a support of the triangular form of interruption to screwdriver with a flat edge (fig. 4.14).
Fig. 4.15. Installation of a ring of lock of a spherical support: 1 – adaptation 09545-1C000A or 09545-1C000B; 2 – lock the ring; 3 – spherical support

Establish a ring of lock (fig. 4.15) through adaptation 09545-1C000A/B.
Through the adaptation 09545-1C000A/B they establish a new protective covering.
Withdraw a ring of lock.
Fig. 4.16. Removal of a spherical support of the lever of support of the triangular form of interruption

The plastic kiyanka beat a finger of a spherical support of the lever of a support of the triangular form of interruption (rice 4.16).
Fig. 4.17. A proof of press of a spherical support in the lever of support of the triangular form of interruption

   Through the adaptation 09545-11000A/B they hold tight a new spherical support (fig. 4.17) in the lever of support of the triangular form of interruption.
Enclose the Variant R-2 lubricating in a covering and in a finger of hinge.
Check of technical condition
Check the next thing:
– saylentblok in existence of use and damages;
– the lever of support of the triangular form of interruption in existence of deformations or break;
– a covering of a spherical support in existence of slits and damages;
– all the pins of there is seized the existence of damages and the deformation;
Fig. 4.18. Check of technical condition of a spherical support through a dynamometer key

– moment from resistance to a provorachivaniye of a finger of a spherical support (fig. 4.18).
In the presence of a slit in a covering of a support they substitute a joined spherical support.
Several times shake a finger of the spherical hinge.
Check the moment from the resistance to a provorachivaniye of a finger of a spherical support.
Value of control of 3,5-10 N · m.
If the moment of a provorachivaniye of a finger of a spherical support to exceed the specified superior limit, it substitutes a spherical support. If the moment of a provorachivaniye of the hinge will be less than the lowest limit, his new use in the condition of the lack of the interference and a play of excessive side are allowed.

Removal of a nave
Withdraw an advanced wheel.
Beat the quiff and put out a nut of the fixation of a nave of an advanced wheel.
Withdraw a joined support of a guide of blocks and shoes of brake of a rotary fist and lift it in a technological hook or a wire to a hoof of the car.
Withdraw the sensor of the speed of the rotation of a wheel of a rotary fist.
Fig. 4.19. Vypressovka of a finger of the spherical hinge of a tip of 09568-34000 directs the sketch of a rotary fist through an artist of streaptise


Artist of streaptise to 09568-34000 vypressuyta a finger of the spherical hinge of a tip of directing the sketch of a rotary fist (fig. 4.19).

       TO OBSERVE
That the artist of streaptise 09568-34000 was not falling, tie it to any shut located detail.

 Substitution of the load of pressure of an advanced support of the triangular form of interruption

Fig. 4.20. Rotary fist of a torture of an advanced support of the triangular form of interruption: 1 – a brake support was joined with blocks; 2 – protection covering; 3 – brake disc; 4 – nut of fixation of a nave; 5 – nave; 6 – rotary fist; 7 – lever of support of the triangular form of interruption; 8 – pressure load; 9 – lock the ring

The rotary fist of a torture of an advanced support of the triangular form of interruption is shaken in the fig. 4.20.
Artist of streaptise to 09568-34000 vypressuyta of the rotary lever a finger of a spherical support of the lever of a support of the triangular form of interruption.
Establish a lavador below a nave nut for the concave party in the interior, like shown in the fig. 4.20.

Rotary fist
Desconecte a traction end in four wheels of a nave.
Desconecte a torture of support of the triangular form of interruption of a rotary fist.
Withdraw a rotary fist joined with a nave.
Installation
The installation is done as it must be, the return to the removal.
Hold tight connections put the moments supplied down, N · м:
Nut of fixation of a nave..... 200-260
Nut of fixation of a finger of a spherical support of the lever of a support of the triangular form of interruption to a rotary fist..... 60-72
The nuts of pins of the fixation are resistant supports of the triangular form of interruption to a rotary fist..... 110-130
Desmontagem
 Withdraw a disc of brake of a nave, having unscrewed two screws of the fixation.
Fig. 4.21. Removal of a ring of lock

Withdraw a ring of lock (fig. 4.21).
Fig. 4.22. Devices installation 09517-21500 and 09517-29000 for a pressure that overdoes vypressovka

 Install devices 09517-21500 and 09517-29000, like shown in the fig. 4.22.
Vypressuyte a nave of a rotary fist, when 09517-29000 spinning adaptation nut.
  Withdraw devices 09517-21500 and 09517-29000, and also a pondering ring for the mud.
Check of technical condition
Check a nave to existence of slits and openings in the use existence.
Check a disc of brake to existence of zadir and other damages.
Check a rotary fist to slits existence.
Check the load to existence of slits and damages.
Apply a fine film of the universal lubricant in the inter-connected surfaces of a rotary fist and an extern ring of the load.
Through adaptation 09532-31200th press the pressure load in a rotary fist.
Meeting
Vypressuyte of a nave an internal ring of the load through adaptation 09495-33000.
Through devices 09517-02000 and 09977-21811 to a vypressuyta of a rotary fist an extern ring of the load of pressure.

       Notes
Not to damage the load, make an effort of a press that is adjusted for his extern ring.
Substitute the pressure that loads new in the moment of each removal.

Establish a pondering ring for the mud.
Fig. 4.23. The device 09495-33100 for a press of nave that is adjusted in a rotary fist

Through the adaptation 09495-33100 hold tight a nave in a rotary fist (fig. 4.23).

       TO OBSERVE
It executes a press that is adjusted with an emphasis to an internal ring of the load not to damage the load.

Establish a disc of brake.
09517-21500 holds tight a nut of nave the moment of 200-260 N · m through adaptation.
Fig. 4.24. Check of an axial slit in the pressure load

If after a nave nut inhaling the axial slit in the load (fig. 4.24) exceeds the permissible maximum, so the load of pressure and the rotary lever they install incorrectly. In this case they tie type with knot and join it repeatedly.
The most admissible axial slit in the pressure load will do not more than 0,008 mm.
09517-21500 withdraws the adaptation.
Several times become a nave of the autoinstallation of the load.
Fig. 4.25. Check of the moment of resistance to a pressure that overdoes provorachivaniye

Check the moment from the resistance to a provorachivaniye of the load of pressure (fig. 4.25).
The very permissible moment from the resistance to a provorachivaniye of the load of pressure will pass not more than 0,99 N · m.
If the moment from the resistance is as a provorachivaniye the same as the zero, check an axial slit in the load.

 Stabilizer of angry stability

Fig. 4.26. Bar of the stabilizer of angry stability: 1 – arm of bar of stabilizer; 2 – stabilizer bar saylentblok; 3 – stabilizer bar; 4 – torture of an advanced support of the triangular form of interruption; 5 – torture of the stabilizer of angry stability; 6 – cork; 7 – esticador

The bar of the stabilizer of the angry stability is shown in the fig. 4.26.
Removal
Withdraw an advanced wheel.
Fig. 4.27. Torture of the stabilizer of angry stability

Withdraw a torture of the stabilizer (fig. 4.27).
Fig. 4.28. Bar of the stabilizer of angry stability

      Put out pins of the fixation of arms of a bar of the stabilizer (fig. 4.28).
Withdraw a bar of stabilizer.
Check of technical condition
Check a bar of stabilizer to deterioration in properties of the material and existence of damages.
Check all the pins of the fixation of existence of damages and deformation.
Check a protective covering of the spherical hinge of a torture of the stabilizer of the existence of slits or damages.
Fig. 4.29. Check of the moment of a provorachivaniye of fingers of spherical hinges of a torture of the stabilizer

Check the moment of a provorachivaniye of fingers of spherical hinges of a torture of the stabilizer (fig. 4.29).
In the presence of a slit in a covering of the spherical hinge they substitute a new covering, having enclosed in him the lubricant.
Several times shake a finger of the spherical hinge.
Coat самоконтрящуюся a nut of fixation of the hinge spherical and measured the finger of hinge provorachivaniye moment. It will be the same as 0.7-2 N · m.
If the moment of a provorachivaniye of a finger of the hinge to exceed the specified superior limit, it substitutes a torture of stabilizer. If the moment of a provorachivaniye of a finger of the spherical hinge it will be specified less than lower limit, his new use in the condition of the lack of the interference and a play of excessive side is allowed.
Installation
Establish in a stabilizer bar a saylentblok of the exterior side of the cork located in a bar.
Establish an arm in a saylentblok.
   Previously hold tight pins of the fixation of an arm and establish an arm of another side of the car.
Establish a torture of stabilizer.

Esticador
Fig. 4.30. Esticador: 1 – bar of the stabilizer of angry stability; 2 – the arm of a few back balanced the support of an amount of motor; 3 – esticador; 4 – lever of support of the triangular form of interruption

The esticador shows off in the fig. 4.30.
Removal
Put pins of the fixation out of saylentblok of the lever of a support of the triangular form of interruption.
Fig. 4.31. Tube of reception of scarfs

Withdraw a tube of reception of scarfs (fig. 4.31).
Fig. 4.32. Arm of a balanced support of an amount of motor


Withdraw an arm of the balanced support of a few back of an amount of motor (fig. 4.32).
Since the simplification of the removal of an esticador puts out pins of the fixation of the mechanism of direction and a nut of the fixation of fingers of spherical hinges of tortures of the stabilizer, it lifts the mechanism of direction and direction of thirst of the motor.
Fig. 4.33. Installation of a monkey below an esticador


Establish a monkey (fig. 4.33) below an esticador and they withdraw an esticador, having put out pins of his fixation to a body.
Check of technical condition
Check an esticador to slits existence or the deformation.
Check the support of a support of the triangular form of interruption and a saylentbloka of the existence of slits or deterioration in properties of the material.
Installation
Establish an esticador, supporting it for a monkey.
Install the mechanism of direction and a torture of the stabilizer of the angry stability.
Pins of coat and nuts of fixation of saylentblok of levers of a support of the triangular form of interruption.
Establish an arm of the balanced support of a few back of an amount of motor.
Establish a tube of reception of scarfs.